Место работы автора, адрес/электронная почта: Северо-Восточный федеральный университет им. М. К. Аммосова, Чукотский филиал ; 689000, г. Анадырь, ул.Студенческая, 3 ; e-mail: nv.myreev@s-vfu.ru, myrnik61@gmail.com ; https://www.s-vfu.ru/
Область научных интересов: Педагогика
Количество страниц: 4 с.
The microstructure of a heat-affected zone and alloyage line of welded joint in low-alloy steel is researched at welding by various filler materials. It is established, that the heat-affected zone (HAZ) of austenitic and mart-ensitic welds has a disperse structure and less sharp transition of structure from base metal to weld metal, than ferrite-perlite weld. If consider, that hydrogen diffuses mainly at the grain boundaries, the large-grain structure HAZ of ferrite-perlite weld, being a barrier, will promote of its accumulation at the grain boundaries, that will lead to the delayed destruction.
Влияние микроструктуры зоны термического влияния и линии сплавления сварного соединения низколегированной стали на замедленное разрушение=dEffect of heat-affected zone microstructure and alloyage line of welded joint in low-alloy steel on the delayed destruction / А. А. Аргунова, Я. С. Семенов, Н. В. Мыреев, Т. А. Габышева // Известия Самарского научного центра Российской академии наук.— 2010. — Т. 12 (33), N 1 (2). — С. 276-279.
Количество страниц: 5 с.
- Математика. Естественные науки > Физика,
- Прикладные науки. Медицина. Ветеринария. Техника. Сельское хозяйство > Инженерное дело. Техника в целом,
- НАУКА ЯКУТИИ > МАТЕМАТИКА. ЕСТЕСТВЕННЫЕ НАУКИ > Физика,
- НАУКА ЯКУТИИ > ПРИКЛАДНЫЕ НАУКИ. МЕДИЦИНА. ТЕХНИКА. СЕЛЬСКОЕ ХОЗЯЙСТВО > Инженерное дело. Техника в целом.
For calculation of resourse and reliability at creation of technics in northern modification it is necessary to consider the change of physicomechanical characteristics of constructional materials at transition from a viscous condition in fragile. In the given paper, according to the mechanism viscous-fragile transition mechanism, are modelled geometry and stresses at peak of crack. The geometry of peak of crack and stresses in it, according to the offered dependence of interatomic interactions are temperature-dependent magnitudes. At lowering temperature below Tвхп the crack at its driving feels lattice capture at different distributions of residual microstresses.
Семенов, Я. С. К изменению геометрии вершины трещины и напряжения в окрестностях температуры вязко-хрупкого перехода / Я. С. Семенов, М. П. Лебедев, Н. В. Мыреев // Известия Самарского научного центра Российской академии наук. — 2009, спец. вып. : Актуальные проблемы машиностроения. — С. 118-122.
Количество страниц: 6 с.
- Математика. Естественные науки > Физика,
- Прикладные науки. Медицина. Ветеринария. Техника. Сельское хозяйство > Химическая технология. Химическая промышленность. Родственные отрасли,
- НАУКА ЯКУТИИ > МАТЕМАТИКА. ЕСТЕСТВЕННЫЕ НАУКИ > Физика,
- НАУКА ЯКУТИИ > ПРИКЛАДНЫЕ НАУКИ. МЕДИЦИНА. ТЕХНИКА. СЕЛЬСКОЕ ХОЗЯЙСТВО > Химическая технология. Химическая промышленность. Родственные отрасли.
Mechanisms of the retarded fatique fracture of material in details, machine units, mechanisms and equipment on example of low-alloy high-strength steels HQ70 and HQ80C are researched at tests on "Implant" method. As a result it is gained, that steel HQ70 and HQ80C have high enough tendency to the retarded destruction. Especially in zones of a weld and thermal effect because of the maintenance of high internal stresses. From this it is possible to conclude, that welded assemblies, stress concentrators in ma-chines, mechanisms, owing to long accumulation of defects lead to the fatique fracture for the period of autumns - winter maintenance.
К усталостному разрушению в узлах и деталях машин, механизмов, оборудования=To the fatigue fracture in units and machine components, mechanisms, equipment / Я. С. Семенов, С. П. Портнягин, Н. В. Мыреев, К. В. Яковлева // Известия Самарского научного центра Российской академии наук. — 2010. — Т. 12 (33), N 1 (2). — С. 508-513.